Version 3 of SDiskEmul by Sundance, a floppy disk emulator, is available.

SDiskEmul works with Atari XE/XL (SIO mode), Atari gamme ST, Amiga (MFM mode) and Amstrad CPC. Writing is only possible with Atari .ST disks images.

Version 3 brings :

• installation without soldering on SCART,
• graphic resolution : 320x240 (40x32 characters),
• PS2 mouse port included,
• hardware and software optimization : performances up to 50%.

You can check a video of SDiskEmul v3 on Youtube.

First shipments of the SDCard HxC floppy emulator has started. You can download its documentation.

If you were late for last HxC pre-sale, here is another SDCard HxC Floppy Emulator pre-sale on Ebay. Price is 60 pounds sterlings plus shipping (about 78 €). The cards are made by Lotharek (Poland) with the permission of the HxC author.

Beware, you will also need the proper cable sold on Ebay :

• cable for plain CPC (not Schneider, neither CPC+),
• cable for CPC+,
• cable for Schneider CPC (not CPC+).

And of course, you will also need a 5 volts alimentation for the HxC.

You can now pre order your SDCard HxC Floppy Emulator on Ebay. Price is 60 pounds sterlings plus shipping (total of 78,19 €). The cards are made by Lotharek (Poland) with the permission of the HxC author.

Beware, you will also need the proper cable sold on Ebay :

• cable for plain CPC (not Schneider, neither CPC+),
• cable for CPC+,
• cable for Schneider CPC (not CPC+).

And of course, you will also need a 5 volts alimentation for the HxC.

This version supports of course reading of DSK, but also writing.

You can see this SDCARD HxC floppy emulator working on an Amstrad on Youtube.

After the Ubi Soft gun for 217 Euros on Ebay, here it is a DK'Tronics 256 Ko silicon disk for 323 pounds. I was interested in it, but I had to change my mind :-).

You can now build for about 8 € your own AMX Compatible Mouse Adapter which let you use any PS2 or USB mouse using a USB to PS/2 adapter plug (no bluetooth USB mouses though), and use any AMX compatible Amstrad CPC software like advanced OCP art studio, FutureOS or SymbOS.

This weekend Dr.Zed brought Prodatron a batch of the SYMBiFACE II card (25 pieces) including cables with edge connectors. So you can order it again! At the moment Prodatron can't ship centronics connector cables, but he hopes to have them at the end of december from Dr.Zed. You can mail him at jmika [a t] prodatron [d o t] net.

Since the announce of the last french CPC meeting in May 209 organized by Eliot, I learned that he uses a disk drive replacement based on SD cards. But there are some others too, but one isnt finished atm, and for the 2 others, the most difficult part is to get one, unless you are good at making your own :

• Floppy Disk Emulator : SDiskEmul by Sundance,
• HxC Floppy Emulator, there is an USB version (CPC is connected to a PC) and a standalone sdcard version(which supports writing). The author may create a batch of these sdcards cards soon, more informations when I have some,
• TFE (Tolga Floppy Emulator).

In fact, there is a 4th one, made by RAM7 based on USB key, that he showed to the last meeting, but I have no more informations about it.

Seen on the comp.sys.amstrad.8bit newsgroup : the Stelladaptator allows the use of standard Atari 2600-compatible controllers, including joysticks (like the one used on Amstrad CPC), paddles, and driving controllers, with modern computers running Windows, Macintosh, or Linux operating systems. Any Atari 2600-compatible joystick, when plugged into your computer through the Stelladaptor will behave as a normal joystick. This allows the use of classic Atari controllers with any software that will work with an 8-direction digital joystick controller (left, right, up, down, and diagonals).

Dr Zed has given informations about the Symbiface II status. Bugs were discovered at the Castlemeeting 2006. He is now only waiting for PCB he ordered (3 weeks) to start really the production.