Due to hasard, I found the Github of Jason Brooks (Argonaut) where you will be able to find the source code of his Amstrad CPC programs (1985 to early 1990). You can read there that he was mostly programming in assembler, ADAM (Assembler, Disassembler and Monitor) was his tool of choice as it was fully relocatable, could be loaded into a ram bank on a 6128 and was very capable when hacking and reverse engineering code and protection systems in its day

The Return of Traxtor is a reflexion game by Reidrac (Juan Jose MARTINEZ) first released on Amstrad CPC (v1.1 de 2016) and now for msdos and CGA, so you can run it on any Amstrad PC.

Ci-dessous une vidéo de Return of Traxtor par Saberman.

PunyInform v5.0 by Fredrik Ramsberg and Johan Berntsson is a library written in Inform 6 to create adventure game (pure text, no graphic support contrary to DAAD) using the Z-machine virtual machine which will run on 8bit computers (or more recent computers too). PunyInform has a parser, knowing of common verbs and a framework to write adventure games.

PunyInform is based on the Inform 6 library written by Graham Nelson. Its goal is to make easily adventure games in Inform 6, with a manual describing the differences between the official library and PunyInform..

Games using PunyInform can be compiled in z3, z5 and z8 format (z3 being the best format for 8bit computers, other formats have more features). Compared to the Inform 6 library, it means that there is no support for the Glulx virtual machine but z3 format is important as Inform 6 doesnt support it.

To compile games written with PunyInform, you should use the Inform 6 compiler maintained by David Kinder. Binaries are available on if-archive. PunyInform needs Inform v6.35 (or more).

They are tutorials to write adventure game with PunyInform (end of the page) and all the documentation including a 8 page cheat sheet (quick reference)..

To try your game after compilation, you can use WinFrotz by David Kinder, to create map easily you can use Trizbort.

And finally, to create an Amstrad CPC and PCW disk image, you will have to use the Puddle BuildTools.

PunyInform v4.7 by Fredrik Ramsberg and Johan Berntsson is a library written in Inform 6 to create adventure game (pure text, no graphic support contrary to DAAD) using the Z-machine virtual machine which will run on 8bit computers (or more recent computers too). PunyInform has a parser, knowing of common verbs and a framework to write adventure games.

PunyInform is based on the Inform 6 library written by Graham Nelson. Its goal is to make easily adventure games in Inform 6, with a manual describing the differences between the official library and PunyInform..

Games using PunyInform can be compiled in z3, z5 and z8 format (z3 being the best format for 8bit computers, other formats have more features). Compared to the Inform 6 library, it means that there is no support for the Glulx virtual machine but z3 format is important as Inform 6 doesnt support it.

To compile games written with PunyInform, you should use the Inform 6 compiler maintained by David Kinder. Binaries are available on if-archive. PunyInform needs Inform v6.35 (or more).

They are tutorials to write adventure game with PunyInform (end of the page) and all the documentation including a 8 page cheat sheet (quick reference)..

To try your game after compilation, you can use WinFrotz by David Kinder, to create map easily you can use Trizbort.

And finally, to create an Amstrad CPC and PCW disk image, you will have to use the Puddle BuildTools.

L'émulateur Amstrad CPC ACE par Offset n'est disponible que pour MorphOS et Haiku. Il a une fonctionnalité fort intéressante par rapport à d'autres émulateurs Amstrad CPC : avoir un système de plugin pour rajouter le support pour des extensions matérielles.

Mais bientôt avec Ace Hacked par Roudoudou, il sera disponible pour Linux, MacOS et Windows !

A new version of the ANSI-C compiler SDCC v4.3.0 is available since the 7th June 2023 for windows, linux and MacOS.

Anthony Flack is working on a remake of Bomb Jack for Amstrad CPC with the aim of bring faithful with the arcade version. Don't hesitate to check his videos on his Youtube channel.

Pulkomandy has released a new version v1.4 of his fork of Contiki v1.x for Amstrad CPC. More informations on his Contiki page (with the download).

Contiki is a small operating system for embedded devices. While version 2 of the system is designed to run on embedded devices and has an IP and IPv6 stack as the main feature, the 1.x version of the system is better known for being ported to several 8-bit and 16-bit home computers.

A new version of the prorgamming framework CPCTelera v1.5 (1st May 2023) by Francisco Gallego is available.

PunyInform v4.3 by Fredrik Ramsberg and Johan Berntsson is a library written in Inform 6 to create adventure game (pure text, no graphic support contrary to DAAD) using the Z-machine virtual machine which will run on 8bit computers (or more recent computers too). PunyInform has a parser, knowing of common verbs and a framework to write adventure games.

PunyInform is based on the Inform 6 library written by Graham Nelson. Its goal is to make easily adventure games in Inform 6, with a manual describing the differences between the official library and PunyInform..

Games using PunyInform can be compiled in z3, z5 and z8 format (z3 being the best format for 8bit computers, other formats have more features). Compared to the Inform 6 library, it means that there is no support for the Glulx virtual machine but z3 format is important as Inform 6 doesnt support it.

To compile games written with PunyInform, you should use the Inform 6 compiler maintained by David Kinder. Binaries are available on if-archive. PunyInform needs Inform v6.35 (or more).

They are tutorials to write adventure game with PunyInform (end of the page) and all the documentation including a 8 page cheat sheet (quick reference)..

To try your game after compilation, you can use WinFrotz by David Kinder, to create map easily you can use Trizbort.

And finally, to create an Amstrad CPC and PCW disk image, you will have to use the Puddle BuildTools.

CPCEC GTK by NoRecess is an Amstrad CPC(+) emulator under linux, a fork of CPCEC by CNGSoft. Its features are turned especially for people who develop Amstrad CPC software under linux.

Ramiro el Vampiro was at the start a platform game for ZX Spectrum par The Mojon Twins, released in 2013, with an upgraded version in 2016.

The Mojon Twins were working since 2021 on Ramiro el Vampiro 3 for Amstrad CPC and ZX Spectrum, it's now done for your gaming pleasure.

You can download a tape image or a snapshot, in spanish or in english.

PunyInform v4.0 by Fredrik Ramsberg and Johan Berntsson is a library written in Inform 6 to create adventure game (pure text, no graphic support contrary to DAAD) using the Z-machine virtual machine which will run on 8bit computers (or more recent computers too). PunyInform has a parser, knowing of common verbs and a framework to write adventure games.

PunyInform is based on the Inform 6 library written by Graham Nelson. Its goal is to make easily adventure games in Inform 6, with a manual describing the differences between the official library and PunyInform..

Games using PunyInform can be compiled in z3, z5 and z8 format (z3 being the best format for 8bit computers, other formats have more features). Compared to the Inform 6 library, it means that there is no support for the Glulx virtual machine but z3 format is important as Inform 6 doesnt support it.

To compile games written with PunyInform, you should use the Inform 6 compiler maintained by David Kinder. Binaries are available on if-archive. PunyInform needs Inform v6.35 (or more).

They are tutorials to write adventure game with PunyInform (end of the page) and all the documentation including a 8 page cheat sheet (quick reference)..

To try your game after compilation, you can use WinFrotz by David Kinder, to create map easily you can use Trizbort.

And finally, to create an Amstrad CPC and PCW disk image, you will have to use the Puddle BuildTools.

Reidrac (Juan Martinez) is actually working on two projects : a RPG (Ultima like) and Hyperdrive which is a shoot them up, whose release date will be December 2022, with a loading screen by Titan.

Revenge of Trasmoz by Volcano Bytes is a WIP Amstrad CPC conversion of their game Curse of Trasmoz originally for ZX Spectrum. It's a 2 player arcade platform game on one screen.

The game is written by Carlos Pérezgrin and Borja de Tena, music and sound FX by Beyker and A. Pérez, cover art and graphics by Dani Diez, loading screen by BitFans. It is written with the CPCTelera framework by Francisco Gallego.